Description

DIRECT FROM SHIPYARD

24M MULTICAT TYPE/ DREDGING ASIST WORKBOAT

Length (Loa) : 23.90 m
Beam (B) : 10.00 m
Depth: 3.25 m
Propulsion System : 2x CAT / C18- 873 BHP @ 2200 RPM
Gen-Set: 2x Cummins Onan - Equivalent / 17.5 MDKDR
Deck Equipments: Deck Crane1 – 30TM / Deck Crane2 – 120TM / Towing Winch / Tugger Winch
Commercial Details: 1 ( One ) Work Boat.
Classification: Bureau Veritas – Notation : • Hull • Mach Special Service / Workboat Coastal Area

Specifications

Engine(s)

SPECIFICATIONS
I-6, 4-Stroke-Cycle-Diesel
651 bkW (873 bhp)
STANDARD EQUIPMENT
Air Inlet System
Corrosion-resistant sea water aftercooler, air cleaner/fumes disposal (closed system), jacket water cooled turbocharger, turbocharger inlet OD straight connection
Control System
Electronic governing (A4), programmable low idle, electronic diagnostics and fault logging, fuel/air ratio control, electronic throttle position sensor
Cooling System
Thermostat and housing, block heater (1500W, 120V AC current), gear-driven jacket water pump, self priming, gear-driven sea water pump with bronze impeller, titanium plate type heat exchanger
Exhaust System
Watercooled exhaust manifold and turbocharger, round-flanged outlet
Flywheel and Flywheel Housings
Standard SAE No. 1 flywheel and flywheel housing, 113 teeth, SAE standard rotation; optional SAE
No. 0 flywheel and flywheel housing, 136 teeth, SAE standard rotation
Fuel System
Fuel filter, RH service on port, LH service on starboard; fuel transfer pump; fuel priming pump; flexible fuel lines
Displacement...................18.1 L (1106 in3) Rated Engine Speed ......................2200 Bore...........................145 mm (5.7 in.) Stroke . . . . . . . . . . . . . . . . . . . . . . . . . 183 mm (7.2 in.) Aspiration . . . . . . . . . . . . . Turbocharged-Aftercooled Governor ............................Electronic Cooling System . . . . . . . . . . Heat Exchanger Cooled Weight, Net Dry (approx.). . . . . . . . 1673 kg (3688 lb) Refill Capacity
Cooling System . . . . . . . . . . . . . . . 45.8 L (12.1 gal)
Lube Oil System . . . . . . . . . . . . . . . . 64 L (16.9 gal) Oil Change Interval ...................500 hours
Caterpillar Diesel Engine Oil 10W30 or 15W40 Rotation (from flywheel end) . . . . . Counterclockwise Flywheel and flywheel
housing ...............SAE No. 1 or SAE No. 0 Flywheel Teeth
SAENo.1............................... 113
SAE No. 0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Maximum Exhaust
Backpressure .......... 6.7 kPa (26.9 in. water)

Disclaimer

The details of this vessel is offered in good faith but cannot be guaranteed. Vessels specification can be changed without notice. We warrant the accuracy of this information and warrant the conditions of the vessel. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

We are a workboat builder also representing many other clients. New Building or second hand; Car Ferry, RORO, Ro Pax, Cruise Ship, Day Passenger Vessel, Fishing Vessel (Purse Seiner , Long Liner , Freezing Stern Trawler), Tug Boat, ASD, AHST, Supply, Rescue, Crew Boat, Pilot Boat, Patrol Boat, Barge, Split Hopper Barge, Pontoon, Landing Craft, Dredger, Fish Farm Catamaran, Dredger, Multicat, HDPE Boat, Oil Pollution, Oil Skimmer, Multi Purpose Oil Recovery Vessel; equipped with oil and debris collecting systems and recovered oil handling systems, also be used for boom laying, dispersant spraing, fire fighting, beach washing, emergency fuel transfer, equipment / personnel transport.

We deliver your boat worldwide either by road, sea or air. We can deliver the boat under its own power also. Delivery services are optional. Price of the vessels are not included with delivery option. Istanbul/ Turkey is delivery place of all new build vessels. Used vessels can be located other areas. We do have special delivery price to USA.