10' X 40' X 5' Sectional Multi Configuration Barge
Call us for custom sizes

All steel plate is A-36 1/4" thick.
All framing is made of A-36 3" x 3" x 1/4" angle frames spaced 17.25" apart.
Connector angles are A-36 6" x 4" x 5/8" thick, welded solid to the outer hull.
Connector holes are spaced 24" apart on center.
Connector pins are 1.5" dia. with a 6" double round cap.
All seams are welded 100% solid inside and outside. Each unit is air tested 3-5 psi.
All units are put into configurations and tested for alignment prior to blasting and coating.
This process makes sure the barges are hassle free when it comes to joining the units together.
All units are sand blasted to a near white on the outside and coated with a 2 part salt resistant epoxy by Devoe called Bar rust 235 in Haze gray.
All units come standard with 1-18" flush mounted hatch for access without torching the deck just to get inside the barge.
Each unit is sold with all connector pins needed.